Rangkain Pasif Crossover
A passive crossover has no active filters as were used in the electronic crossover. It uses coils (inductors) and capacitors to cause a rolloff of the audio level. The simplest types use a single coil OR capacitor connected in series with the speaker. If a capacitor is used, it will reduce the lower frequencies getting through to the speaker. If an inductor is used, it will reduce the higher frequencies getting through to the speaker. In this configuration, the rate of rolloff is 6dB/octave. In a more complex configuration combining both coils and capacitors on each speaker, a steeper rolloff is obtainable.
